Industryweek 5320 3d Printing World
Industryweek 5320 3d Printing World
Industryweek 5320 3d Printing World
Industryweek 5320 3d Printing World
Industryweek 5320 3d Printing World

How 3-D Printing Will Transform Manufacturing

Sept. 26, 2013
We're not going to see 3-D printers replace lathes, mills, welding machines and presses anytime soon, certainly not for volume production. But 3-D printing is changing the face of collaborative design and manufacturing process, shrinking lead times, creating previously impossible to manufacture products, and leading to mass personalization.

Toward the end of Sound City, Dave Grohl's new documentary about the famous LA recording studio, Mick Fleetwood laments the technological advances that have changed the face of music production, leading people to believe they can do it all on their own.

People are much happier, Fleetwood contends, when we work with others.

The manufacturing industry could be on the verge of the same conundrum with the advent of 3-D printing.

There's been a drastic shift in manufacturing since the start of the last century – companies did their own design and manufacturing and on occasion raw production – their furthest supplier was probably on the other side of town, not the other side of the world.

But over the past few decades, global supply chains became a necessity.

Now we are in the midst of a formidable "onshoring" movement bringing manufacturing back to North America. But why? The most common reasons we hear are:

  • Closer team collaboration between design, marketing, and manufacturing
  • Reduction in supply networks' lead times
  • Better design integration by reducing cycle times when introducing new designs
  • Ability to adapt to consumers' demands for constantly-evolving products
  • Quality of relationships as well as closer collaboration between end-consumer (B2B or B2C) and manufacturing

So what part will 3-D printing have in all of this?

If 3-D printing is going to become a broadly-accepted method of manufacturing consumer-ready products, in what industries would it fit?

The logical answer (based on the current state of the technology) would seem to be smaller runs of custom designs where personalization would eventually lead to batch sizes of one.  

Then, as design engineers start to get comfortable with the flexibility that 3-D printing provides, they will design products that require components that can only be 3-D printed, essentially integrating theoretical design with production engineering in sporting goods, medicine, aerospace and defense (of course) but also into consumer good, heavy machinery, and everyday objects. 

 In fact, there are already directories online of ready-to-customize then ready-to-print 3-D files.

So as 3-D printing allows shorter manufacturing lead times (think minutes, not weeks or days), 3-D printers will also be utilized throughout the supply chain.  

It's not just for the designer of the end product, but imagine a global supply network where every supplier has a 3-D printer that the designer can "print" to at any time.

It's almost Star Trek's replicators!  

Integrate that concept back into the heart of PLM and vendors can only get on the approved list if they have a compatible 3-D printer of sufficient quality that it can be commandeered to print products at will whether in resin/plastic or even metal.

This really enables not just a global network of supply – but more importantly, a global design network, bringing design expertise from all over the world right to your doorstep, or at least to the corner of your desk.

Making it Work

At the recent NetSuite SuiteWorld 2013 event, NetSuite and Autodesk presented the future of modern manufacturing leveraging both companies' respective, cloud-based products showcasing the possibility in a brief demo, redesigning a product based on customer feedback and cost analysis, through crowd sourcing with consumers voting on designs using a 3-D model.

But what if we took that a step further and 3-D printed a short run of prototype products for in-store display?

The general public is much more likely to become engaged in a product / process where they can see, touch, feel the end product – and not just see it on a website.

We're not going to see 3-D printers replace lathes, mills, welding machines and presses anytime soon, certainly not for volume production. But 3-D printing is changing the face of collaborative design and manufacturing process, shrinking lead times, creating previously impossible to manufacture products, and leading to mass personalization.

Imagine mass manufacturing in batch sizes of one.  

As the technology evolves and the material options broaden they will most definitely be more integrated into traditional manufacturing processes – imagine bearings printed with "Buckyballs" embedded in the race tracks in a variety of sizes depending on the application, or engine exhaust manifolds printed and not cast.

As a new breed of manufacturing and design engineers graduate gain experience with the flexibility and control that 3-D printing provides, you can be sure they will be transforming not just design but the very objects we use in our business and personal lives.

Take a quick look around you at some of the everyday objects as you read this and ask yourself, can that be printed? I'm guessing a good percentage of them could be.

And for those that can't – there's someone going to be asking why, and looking for a way to change that.

Gavin Davidson, vertical market expert for the manufacturing industry, brings to NetSuite more than 25 years of industry experience. In his current role, Gavin is charged with utilizing his understanding of the product, market place and customers to increase sales, improve customer satisfaction and retention and drive the solution maps for partner and product offerings.

Popular Sponsored Recommendations

Empowering the Modern Workforce: The Power of Connected Worker Technologies

March 1, 2024
Explore real-world strategies to boost worker safety, collaboration, training, and productivity in manufacturing. Emphasizing Industry 4.0, we'll discuss digitalization and automation...

3 Best Practices to Create a Product-Centric Competitive Advantage with PRO.FILE PLM

Jan. 25, 2024
Gain insight on best practices and strategies you need to accelerate engineering change management and reduce time to market. Register now for your opportunity to accelerate your...

Transformative Capabilities for XaaS Models in Manufacturing

Feb. 14, 2024
The manufacturing sector is undergoing a pivotal shift toward "servitization," or enhancing product offerings with services and embracing a subscription model. This transition...

Shifting Your Business from Products to Service-Based Business Models: Generating Predictable Revenues

Oct. 27, 2023
Executive summary on a recent IndustryWeek-hosted webinar sponsored by SAP

Voice your opinion!

To join the conversation, and become an exclusive member of IndustryWeek, create an account today!