Baldor Electric Co. -- Weaverville Plant , Weaverville, N.C.
Employees: 130, non-union
Total Square Footage: 160,000
Primary Product/market: mechanical power transmission components
Achievements: ISO 9001:2000 certification; predictive maintenance program increased machine uptime to 97.8% while reducing maintenance repair cost by 35% over six years; recipient of the Baldor President's Award for outstanding safety achievement in 2007 and 2008; fifth consecutive annual award in 2007 for Outstanding Work In Accident Prevention from the North Carolina Department of Labor
|See the other winners of IW's 2008 Best Plants award and find out how they made the top ten.|
The plant, in its resort-like setting in the hills of North Carolina, became part of Baldor when the Dodge-Reliance brands were sold by Rockwell Automation to Baldor in 2007.
The facility was originally built in 1979 as a high-volume batch process. Since then, customer satisfaction has fueled two expansions, raising the number of employees from 30 to 130, says Hoyle.
The employees are non-union with a culture that promotes ongoing improvement through employee involvement, says Brian Lockwood, continuous improvement manager.
At start-up the plant produced only high-volume sheaves. In 1984 bushings were added to the product mix and in 1990 synchronous products were introduced. During that time, a make-to-order strategy has evolved. That addition modifies and augments the original production strategy that was geared toward process efficiency rather than customer demand and inventory management, explains Hoyle. "Now with a culture of continuous improvement focused on customer satisfaction, we are meeting market demands for a more diversified product line," he says.
The facility makes power transmission components that are used to transfer power from a motor or drive unit to an output device in industrial applications. That is accomplished using V-belts or synchronous belts on pulley products made at the facility. Hoyle says the coupling products are used to connect input and output shafts for in-line applications.
|Machine operator Mike Carver loads a steel forging onto a CNC lathe.|
Hoyle says the facility depends on employee-generated ideas to drive continuous improvements. One example resulted in completing the assembly and packaging steps at the machining cells. "By completing the connection from raw material to the packaging of the finished product, we have eliminated all of the non-value-added time associated with material handling between operations and work-in-process."
While connecting processes, the plant has also incorporated load/unload automation in the manufacturing cells. A typical machining cell at the facility includes two CNC turning centers and a vertical machining center. The load/unload automation helps to counter operator fatigue. Hoyle explains that the automation eliminates excessive operator travel during each cycle and provides time for machine operators to perform secondary operations. That work combination varies from gear hobbing, broaching and sawing to packaging product.
The set-up time involved in these robotic cells has also been a major focus during the past three years, adds Lockwood. The time required for the robot setup has been reduced from 45 minutes to an average of five minutes in three cells. Hoyle says the faster changeover has also helped to reduce lot sizes by 51%.
Web Exclusive Best Practices
A Winning Manufacturing Strategy
With 6,000 SKUs, a Baldor plant wins by balancing manufacturing leadtime against inventory.
"Our corporate strategy regarding customer service can be briefly stated as having the products available on the shelf when the customer needs them while committing the least amount of assets to inventory," says Brian Lockwood, continuous improvement manager at Baldor Electric's Weaverville, N.C., plant. "With nearly 6,000 SKUs that task is an ongoing challenge."
IndustryWeek is now accepting nominations for the 2009 IW Best Plants Program.
How was it done? "First, we reduced changeover time to allow us to run smaller lot sizes and then optimized work combinations to internalize secondary operations. Changeover times were reduced by implementing a three-part approach -- quick-change tooling, standard work methods and extensive 5s activities. The 5s activities include such things as organizing, labeling, cleaning and having all items required for production located at the point of use."
IndustryWeek is pleased to announce that representatives of the 2008 winners will be presenting their stories at the annual IW Best Plants conference, scheduled for April 27-29, 2009, in Nashville. Look for continuing informational updates on the IW Best Plants conference Web site.
"In some cases," adds Lockwood, "automation is incorporated to reduce operator workload in order to enable the secondary operations to be internalized. If material is available the manufacturing lead time in these work cells is essentially one day so if a SKU goes out of stock today, we can typically have it replenished tomorrow."
Don't Miss Make-To-Order
Serving customer needs means evaluating whether high volume/batch operations also need support from a make-to-order strategy.
The commitment to high volume, batch operations seemed to be the only way -- until customer feedback told a North Carolina Baldor plant otherwise.
"In 1998 customer feedback indicated there was unfulfilled demand in the market for low quantity [typically one piece] made-to-order V-groove and synchronous sheaves," says Brian Lockwood, continuous improvement manager. "These were typically sheaves that were similar to stock offerings, but required some unique physical characteristics that made them different from any stock offerings. The barrier to success was lead time for these products."
The challenge evolved into a four-part strategy:
- Providing a price quote to the customer
- Developing an engineering drawing of the part
- Obtaining the material
- Manufacturing the part
"To overcome the obstacles, the plant worked with marketing and design engineering teams at headquarters to enter the key variables and produce an accurate price quote and provide engineering drawings for the custom parts," according to Lockwood.
On the manufacturing side the plant decided to dedicate a work cell to the made-to-order product. In addition the decision was made to stock iron in various diameters that could be cut and machined as soon as an order was received.
Plant manager Chris Hoyle says the program now quotes a lead time of 10 days with an average lead time of 6.37 days and has accomplished a one day lead time on some expedited orders.