Industryweek 5305 Nanotube
Industryweek 5305 Nanotube
Industryweek 5305 Nanotube
Industryweek 5305 Nanotube
Industryweek 5305 Nanotube

Engineers Build Computer of One-Atom-Thick Carbon Tubes

Sept. 25, 2013
"People have been talking about a new era of carbon nanotube electronics moving beyond silicon," said Stanford engineering professor Subhasish Mitra, who led the research. "But there have been few demonstrations of complete digital systems using this exciting technology. Here is the proof."

PARIS - American engineers said Wednesday they had built the first computer made entirely of microscopic carbon "nanotubes" -- a big step in the quest for ever-faster, ever-smaller electronic devices.

While performing only basic functions at speeds likened to a 1950s computer, the tiny machine was hailed as a breakthrough in the search for an alternative to silicon transistors, which control the electricity flow in computer microchips.

Carbon nanotubes (CNTs) are rolled-up, single-layer sheets of carbon atoms -- tens of thousands can fit into the width of a single human hair.

They are pliable and have the highest strength-to-weight ratio of any known material.

Silicon is a good semiconductor but cannot be reduced to such a thin layer.

Scientists believe the structure of CNTs may make them better at carrying currents -- thus yielding transistors that are faster, more energy efficient and smaller than silicon -- but actually building nanotube chips has proved difficult.

"People have been talking about a new era of carbon nanotube electronics moving beyond silicon," said Stanford engineering professor Subhasish Mitra, who led the research.

"But there have been few demonstrations of complete digital systems using this exciting technology. Here is the proof."

The computer, built in a laboratory at Stanford University's School of Engineering, was just a few square millimeters in size and able to perform basic counting and number-sorting functions using 178 transistors each holding between 10 and 200 nanotubes.

It runs at 1 kilohertz -- a processing capacity millions of times weaker than today's computers.

The 178-transistor limit was due to the team using a university chip-making facility rather than an industrial process, meaning the computer could in theory be made much bigger and faster, a statement on the study said, published in the journal Nature.

The machine ran a basic operating system that allowed it to multitask and swap between the two processes, it added.

Mitra and his team had been able to deal with two inherent shortcomings of CNT transistors: the tubes do not always grow in perfectly straight lines, which means that mispositioned ones can cause a short circuit, while others changed form and could not be switched on and off.

The team devised a method to burn up and eliminate the uncontrolled CNTs in a transistor and to bypass mispositioned ones.

Though it could take years, the Stanford approach hinted at the possibility of industrial-scale production of CNT semiconductors, Naresh Shanbhag, director of a computer chip design consortium, said in a statement issued by the university.

"These are initial necessary steps in taking carbon nanotubes from the chemistry lab to a real environment," added Supratik Guha, director of physical sciences for software giant IBM's Thomas J Watson Research Centre.

Commenting on the achievement in Nature, Franz Kreupl of the Technische Universitaet Muenchen's Department of Hybrid Electronic Systems said the computer represented a significant advance in electronic engineering.

But the transistors will have to become smaller than the current 8 micrometers thick (millionth of a metre) for the technique to be feasible, and the processor quicker, he said.

– Mariette le Roux, AFP

Copyright Agence France-Presse, 2013

Popular Sponsored Recommendations

Empowering the Modern Workforce: The Power of Connected Worker Technologies

March 1, 2024
Explore real-world strategies to boost worker safety, collaboration, training, and productivity in manufacturing. Emphasizing Industry 4.0, we'll discuss digitalization and automation...

3 Best Practices to Create a Product-Centric Competitive Advantage with PRO.FILE PLM

Jan. 25, 2024
Gain insight on best practices and strategies you need to accelerate engineering change management and reduce time to market. Register now for your opportunity to accelerate your...

Transformative Capabilities for XaaS Models in Manufacturing

Feb. 14, 2024
The manufacturing sector is undergoing a pivotal shift toward "servitization," or enhancing product offerings with services and embracing a subscription model. This transition...

Shifting Your Business from Products to Service-Based Business Models: Generating Predictable Revenues

Oct. 27, 2023
Executive summary on a recent IndustryWeek-hosted webinar sponsored by SAP

Voice your opinion!

To join the conversation, and become an exclusive member of IndustryWeek, create an account today!