Getty Images
Industryweek 36207 Safety 1620 Gettyimages 1130629658
Industryweek 36207 Safety 1620 Gettyimages 1130629658
Industryweek 36207 Safety 1620 Gettyimages 1130629658
Industryweek 36207 Safety 1620 Gettyimages 1130629658
Industryweek 36207 Safety 1620 Gettyimages 1130629658

Tumbling Into Safety

Oct. 15, 2019
A lot of exciting things are happening in manufacturing, but you can’t lose sight of the basics. And safety is a basic.

I took a tumble walking to my car after work the other day. It was my fault entirely. I chose to step over a rope fence rather than walk the extra 200 feet to the proper opening of the parking lot. 

I wasn’t hurt despite my foolish decision to take a shortcut for the sake of expediency over safety, but I could have been.

Ironically, my escapade occurred shortly after I read OSHA’s top 10 most frequently cited workplace safety violations for fiscal year 2019. They were released in September at the National Safety Council 2019 Congress and Expo. It’s a preliminary list, but I suspect the final ranking won’t vary much.

If you haven’t seen the ranking, here it is:

1. Fall Protection – general requirements

2. Hazard Communication

3. Scaffolding

4. Lockout/Tagout

5. Respiratory Protection

6. Ladders

7. Powered industrial trucks

8. Fall protection – training requirements

9. Machine guarding

10. Eye and face protection

These top 10 offenses contributed a total of 26,915 violations during the 2019 fiscal year. This list isn’t specific to manufacturing, but I have no doubt manufacturing contributed a healthy percentage to these statistics.

For all that we talk about manufacturing no longer being “dark, dangerous and dirty,” the truth is that it can still be dangerous. In recent examples, OSHA closed out the month of September by citing a Mississippi manufacturing facility for exposing employees to struck-by and fall hazards following a fatality at the site. Three days earlier, OSHA cited a Georgia manufacturing site for similar violations where, like in Mississippi, a person died in the incident.

Neither of these examples take into account the numbers of OSHA citations issued absent a fatality or absent an injury, but of course there are plenty of those as well. In 2017, the last year for which the U.S. Bureau of Labor Statistics has released final data, manufacturing ranked second in the number of non-fatal occupational injuries and illnesses by private industry, and fifth in incidence rates.

Yes, manufacturing can be dangerous. People work with big pieces of equipment, manufacturing processes can and do involve extreme heat and extreme weight, and too many repetitious motions can cause the human body to revolt.

Some of those dangers we can’t eliminate, at least not now or at least not completely­—making steel will always require heat, stamping metal will always require pressure. What we can do, however, is mitigate the danger. We can create an environment that supports the best possible outcome in terms of safety, not the worst. OSHA standards are an ingredient to making that happen.

Plenty of manufacturers are doing things right and continue to evolve their approaches to safety. Earlier this year, for example, IndustryWeek wrote about Toyota’s embrace of exoskeletons as mandatory personal protective equipment for overhead work at several of its facilities. And every single IndustryWeek Best Plants Award winner we’ve honored has had a robust safety program that routinely delivers OSHA incidence rates that are a fraction of their industry average.

A lot of exciting things are happening in manufacturing—business is good for many U.S. manufacturers, new technologies seemingly are rolling out every day, and if the manufacturing community is successful, more young people will be joining in the business of making things.

Just let’s not forget the basics as we move forward. And keeping your people safe is the basics. The most important basic.

Popular Sponsored Recommendations

Empowering the Modern Workforce: The Power of Connected Worker Technologies

March 1, 2024
Explore real-world strategies to boost worker safety, collaboration, training, and productivity in manufacturing. Emphasizing Industry 4.0, we'll discuss digitalization and automation...

3 Best Practices to Create a Product-Centric Competitive Advantage with PRO.FILE PLM

Jan. 25, 2024
Gain insight on best practices and strategies you need to accelerate engineering change management and reduce time to market. Register now for your opportunity to accelerate your...

Transformative Capabilities for XaaS Models in Manufacturing

Feb. 14, 2024
The manufacturing sector is undergoing a pivotal shift toward "servitization," or enhancing product offerings with services and embracing a subscription model. This transition...

Shifting Your Business from Products to Service-Based Business Models: Generating Predictable Revenues

Oct. 27, 2023
Executive summary on a recent IndustryWeek-hosted webinar sponsored by SAP

Voice your opinion!

To join the conversation, and become an exclusive member of IndustryWeek, create an account today!