Image

IEC Electronics Corp.: IW Best Plants Profile 2010

Dec. 14, 2010
IEC Plant Rises From the Dead: Almost out for the count, circuit-board assembly operation reinvents itself.

IEC Electronics Corp., Newark, N.Y.

Employees: 330, nonunion

Total Square Footage: 235,573

Primary Product/Market: printed circuit boards and assemblies

Start-Up Date: 1966

Achievements: Reduced in-plant defect rate 65% over three years; 143% total unit plant volume increase between 2007 and 2010; 441% profitability increase during the past three years (includes some impact from other plants)

John Biuso says he will occasionally show employees video clips of a Kodak manufacturing plant in Rochester, N.Y., being demolished. As a former Kodak employee, Biuso points out that he knows firsthand what can happen to a plant if it doesn't evolve.

Today, Biuso is the process improvement manager at the IEC Electronics Corp. circuit-board assembly plant in Newark, N.Y. Like the nearby Kodak plant in Biuso's video, IEC's Newark operation was once in danger of imploding, too. The Rochester-area plant struggled to remain viable as low-cost countries took over production of the motherboards IEC once produced for personal computers.

In 2005 the facility found itself in the unenviable position of starting over or shutting down. The company chose the former with the goal of diversifying its product portfolio and establishing lean manufacturing and Six Sigma processes.

The contract manufacturer moved to a high-mix, low-volume model of primarily build-to-order printed circuit boards for growing industries, including medical device and aerospace and defense manufacturing. "It was do or die at this plant if we didn't diversify," Biuso recalls. Over the five-year transition period, IEC's companywide sales, led by the Newark plant, increased 500%.

The plant's resurgence can be attributed to capital upgrades that reduced machine changeover times, a move from batch manufacturing to one-piece flow and a renewed focus on product development and in-house capabilities not easily replicated by competitors.

IEC invested $2 million in new automated assembly equipment that cut setup time in half over a three-year period. A row of feeders similar to film reels deliver tiny circuit board components seated in carrier tape into the robotic machine that assembles the boards. Previously, line workers changed feeders individually to replenish parts, a process that took approximately one hour, Biuso says. The new equipment allows the plant to swap out entire feeder racks that are kept at lineside. The changeover process now takes approximately five minutes.

Lines are located in different "focus factories" dedicated to specific market segments. One area that's helped the plant secure new orders is its prototyping line. IEC separated the prototyping line from other focus factories to prevent production slowdowns in those areas, says Mark Talmadge, director of new product introduction. A "new product introduction ambassador" will hand-deliver the prototype and answer any questions the customer might have, he says. This helps build relationships with IEC customers.

Another capability that plant managers tout as a competitive advantage is the facility's materials analysis lab. The plant employs two people with PhDs who conduct destructive analysis on defects that aren't easily identified rather than sending the product to an outside lab. The process provides the plant with more intimate knowledge of customer problems and allows for a quicker response time, Biuso says.

By incorporating such innovative capabilities into its operations, the IEC plant has positioned itself for future growth and given hope to a regional workforce that's too familiar with the perils of stagnation.

IEC Retains Employees With Muscle Power

Manufacturing in the Rochester, N.Y., area isn't exactly booming. Years of decline have taken a toll along with the migration of skilled workers to other regions. But in nearby Newark, N.Y., IEC Electronics Corp. has taken some unconventional steps to keep workers happy and productive.

For instance, a basement area that was once used to house a prototype production line was transformed into a workout facility. The plant approached local gyms to obtain the latest workout equipment at a discounted rate, says Mark Talmadge, the plant's director of new product introduction.

The result is a workout area that rivals many top-notch gyms, complete with free weights, machines, lockers and a shower room. Many employees utilize the on-site fitness facility before or after work, providing them with a free, convenient place to exercise.

The plant also encourages healthy habits through other programs such as its own version of the popular weight-loss television show "The Biggest Loser," Talmadge says.

Another somewhat unique benefit the plant offers employees is gas-reimbursement program for workers when prices escalate beyond $3 per gallon, Talmadge says. Employees can receive compensation for miles traveled to and from work, he says.

The plant has extra room available for expansion, but plant leaders say they're somewhat limited by the amount of available labor.

IEC has begun working with a marketing firm to step up its recruitment efforts, says Jodi Wahl, marketing coordinator. The plant also is exploring the possibility of establishing an internal recruiting website and connecting with local community colleges to attract more employees, Wahl says.

"We're working hard to brand ourselves as an employer of choice and a great place to work, and we think our reputation is improving," says Donald Doody, executive vice president.

About the Author

Jonathan Katz | Former Managing Editor

Former Managing Editor Jon Katz covered leadership and strategy, tackling subjects such as lean manufacturing leadership, strategy development and deployment, corporate culture, corporate social responsibility, and growth strategies. As well, he provided news and analysis of successful companies in the chemical and energy industries, including oil and gas, renewable and alternative.

Jon worked as an intern for IndustryWeek before serving as a reporter for The Morning Journal and then as an associate editor for Penton Media’s Supply Chain Technology News.

Jon received his bachelor’s degree in Journalism from Kent State University and is a die-hard Cleveland sports fan.

Sponsored Recommendations

Voice your opinion!

To join the conversation, and become an exclusive member of IndustryWeek, create an account today!