Report: Environmental Contamination From Fracking Often Happens Close to the Surface

Feb. 17, 2012
'We found no direct evidence that hydraulic fracturing itself -- the practice of fracturing the rocks -- had contaminated shallow groundwater,' said the project leader for a study by the University of Texas.

Environmental contamination from operations to remove gas from deep within the Earth -- known as hydraulic fracturing -- often happens close to surface and not far below, said a study released Thursday.

Spills at the drill site or problems with cement casing around upper well bores were examples of incidents that have led to shallow groundwater contamination in the United States, said the study by the University of Texas.

"Most of what we have seen happening related to shale-gas development that impacts the environment was at or near the surface," said project leader Charles "Chip" Groat, presenting the findings at a major science conference in Vancouver.

"We found no direct evidence that hydraulic fracturing itself -- the practice of fracturing the rocks -- had contaminated shallow groundwater," he added.

"However that doesn't mean that there aren't other parts of the process of gas development that could get things you don't want in shallow groundwater."

Groat said the review of fracking operations in Texas, Louisiana and Marcellus Shale area throughout the northeastern United States was funded by the university and that the team turned down industry funds.

Report Aims to Separate Fact From Fiction

The report, called "Fact-based Regulation for Environmental Protection in Shale Gas Development," aims to "separate fact from fiction" and give policymakers a tool going forward as the United States experiences a major natural-gas boom, Groat said.

However, he admitted that the amount of actual science out there to measure the reports of tapwater that can be lit on fire, earthquakes resulting from fracking and potentially damaging methane emissions is thin.

"We spent a lot of effort looking at the scientific evidence -- which isn't profuse unfortunately, although the scientists are getting more engaged -- and the regulatory evidence from those states to determine what violations had been identified and what the severity was," he said.

The study found that "surface spills of fracturing fluids pose greater risks to groundwater sources than from hydraulic fracturing itself," and described those problems as common to other forms of oil and gas development as well.

It does not call for a strict new regulatory framework but said individual states could take steps to supplement the regulations already in place.

Questions about gas in drinking water and methane emissions will be examined "more intensely in the months ahead" as more research becomes available, Groat added.

Has the Industry Moved Too Fast?

Hydraulic fracturing, or "fracking," is a process by which high-pressure injections of water, sand and chemicals are used to blast through rock to release oil and gas trapped inside.

Advances in horizontal drilling have helped create a boom in the industry, and the U.S. Energy Information Administration has said that natural-gas reserves could supply U.S. needs for 110 years.

Estimates of U.S. shale-gas resources are about 862 trillion cubic feet, a figure that doubled from 2010 to 2011, and shale contributes to 23% of the U.S. natural-gas supply, expecting to reach 46% by 2035 according to the Texas study.

More than 3,000 gas wells have been drilled in Pennsylvania alone in the past six years, according to industry figures, and 15,000 in north Texas, helping drive down the price of natural gas.

Critics, however, say the industry has moved too fast with little regulation, and cite concerns about spills, leaks and contamination from chemicals used in the process. Similar debates are ongoing in Canada, France and other countries.

Copyright Agence France-Presse, 2012

Popular Sponsored Recommendations

How to Build a Predictive Maintenance Program: Lessons Learned from LSB Industries’ Success

Dec. 21, 2023
Register today and join this webinar to gain insight on best practices for setting up a predictive maintenance program from industry experts.

S&OP Optimization: Data-driven Strategies to Achieve Sustainable Profitability

Feb. 6, 2024
Through collaborative S&OP, manufacturers can balance demand and supply effectively, optimize resources, and capitalize on emerging market opportunities. Learn how to maximize...

SEC Cybersecurity Rules: What’s Your Regulatory Risk?

Feb. 27, 2024
Join us for an insightful exploration of the evolving cyber threat landscape, SEC rule implications, and collaborative strategies to secure critical IT and OT networks in the ...

The Year of Results: Four Expectations for 2024 Manufacturing

Feb. 1, 2024
In 2024 manufacturers will need to focus on results, from achieving operational excellence to enhancing digital transformation, to navigating compliance. Stay ahead with crucial...

Voice your opinion!

To join the conversation, and become an exclusive member of IndustryWeek, create an account today!