Image courtesy of General Motors.
2023 Cadillac Lyriq Ev

General Motors Uses Cisco Wireless for High-Speed Vehicle Tests

April 28, 2022
Fast cars zooming around closed tracks provide vital test data for rapid development that accelerates time-to-market for new vehicles.

At the GM Milford Proving Ground on the northwest outskirts of Detroit, General Motors deploys Cisco wireless networks to gather data on pre-production vehicles during high-speed performance testing. Engineers record up to 200 data channels simultaneously.

This replaces the traditional system of capturing vehicle data locally, analyzing the data offsite and re-running the tests later. With real-time data reporting, engineers can adjust performance on the fly during the same session.

“We now have stable and secure wireless network connections in this environment where we have vehicle speeds that can exceed 100 mph,” says Stephen Jenkins, director Global Labs, Proving Grounds Operations and Materials Engineering at GM. “This connectivity allows us to perform real-time analysis and stream information directly into our Enterprise Data Center without any buffering or human intervention.”

Removing Test Driver Distractions for Added Safety

Tests that run 30-to-60-minutes previously forced drivers to monitor vehicle system performance. With their attention split between driving and monitoring test data, drivers may notice warnings conveyed by onboard instrumentation too late, resulting in safety concerns.

“Examples could include an engine failure due to oil pressure issues, or a brake system failure due to a line leak, both of which can now be detected before the catastrophic system failure,” a GM representative tells IndustryWeek. “The benefits are improved driver safety (especially in the brake system example) and improved ability to diagnose/repair system issues (especially in the engine example) which can be difficult after a catastrophic failure.”

GM deploys the wireless backhaul technology, that uses fiber connectivity and wireless communications, for both ICE and EV vehicle tests, in the latter case for calibration of propulsion systems on pre-production vehicles.

Quickly capturing test data is part of GM's larger strategy to develop and deploy vehicles more quickly. Historically, going from initial sketch to production vehicle took at least five years, but in the past few years, GM and other automakers have cut that by more than half.

As Chair and CEO Mary Barra said in her letter to investors announcing $2.9 billion in first-quarter profits, “The GM news ahead of us this year will also be focused on acceleration and growth, especially in EVs. As I’ve shared in this letter, we are now in a rapid launch cycle thanks to investments and initiatives we have undertaken across our entire company over the last several years. They have allowed us to establish an unparalleled foundation on which to execute and scale.

Popular Sponsored Recommendations

Voice your opinion!

To join the conversation, and become an exclusive member of IndustryWeek, create an account today!