Copyright Bill Pugliano,Getty Images
Industryweek 31336 Secretary Chao 0

Transportation Secretary Chao Says New Emission Standards are More Realistic

Aug. 2, 2018
“More realistic standards will promote a healthy economy by bringing newer, safer, cleaner and more fuel-efficient vehicles to U.S. road,” said Secretary Elaine L. Chao.

On August 2, the EPA and the NHTSA announced the proposed rulemaking the Safer Affordable Fuel-Efficient (SAFE) Vehicles Rule for Model Years 2021-2026 Passenger Cars and Light Trucks (SAFE Vehicles Rule). The agencies said this rule is to "correct the national automobile fuel economy and greenhouse gas emissions standards to give the American people greater access to safer, more affordable vehicles that are cleaner for the environment.”

“There are compelling reasons for a new rulemaking on fuel economy standards for 2021-2026,” said Secretary Elaine L. Chao. “More realistic standards will promote a healthy economy by bringing newer, safer, cleaner and more fuel-efficient vehicles to U.S. roads and we look forward to receiving input from the public.”

The SAFE Vehicles Rule is the next generation of the Congressionally mandated Corporate Average Fuel Economy (CAFE) and Light-Duty Vehicle Greenhouse Gas Emissions Standards. This Notice of Proposed Rulemaking (NPRM) is the first formal step in setting the 2021-2026 Model Year (MY) standards that must be achieved by each automaker for its car and light-duty truck fleet.

The agencies are seeking public comment on a wide range of regulatory options, including a preferred alternative that locks in MY 2020 standards through 2026, providing a much-needed time-out from further, costly increases. The agencies’ preferred alternative reflects a balance of safety, economics, technology, fuel conservation, and pollution reduction. It is anticipated to prevent thousands of on-road fatalities and injuries as compared to the standards set forth in the 2012 final rule. The joint proposal initiates a process to establish a new 50-state fuel economy and tailpipe carbon dioxide emissions standard for passenger cars and light trucks covering MY 2021 through 2026.

 “We are delivering on President Trump’s promise to the American public that his administration would address and fix the current fuel economy and greenhouse gas emissions standards,” said EPA Acting Administrator Andrew Wheeler. “Our proposal aims to strike the right regulatory balance based on the most recent information and create a 50-state solution that will enable more Americans to afford newer, safer vehicles that pollute less. More realistic standards can save lives while continuing to improve the environment. We value the public’s input as we engage in this process in an open, transparent manner.”

The current standards have been a factor in the rising cost of new automobiles to an average of $35,000 or more—out of reach for many American families, the agencies said. Compared to the preferred alternative in the proposal, keeping in place the standards finalized in 2012 would add $2,340 to the cost of owning a new car, and impose more than $500 billion in societal costs on the U.S. economy over the next 50 years.

Additionally, a 2018 government study by NHTSA shows new model year vehicles are safer, resulting in fewer deaths and injuries when involved in accidents, as compared to older models. Therefore, the Administration is focused on correcting the current standards that restrict the American people from being able to afford newer vehicles with more advanced safety features, better fuel economy, and associated environmental benefits.

On April 2, 2018, the EPA issued the Mid-Term Evaluation Final Determination which found that the MY 2022-2025 GHG standards are not appropriate and should be revised. For more than a year, the agencies worked together to extensively analyze current automotive and fuel technologies, reviewed economic conditions and projections, and consulted with other federal agency partners to ensure the most reliable and accurate analysis possible. 

Popular Sponsored Recommendations

Interconnected but Exposed: Hidden Third-Party Cyber Risks in Manufacturing

March 7, 2024
Dive into the cyber risks facing US manufacturing from third-party ties. Learn mitigation, secure access, and compliance strategies with live solution demos. Equip your business...

Navigate Complex Cybersecurity Requirements With Purpose-Built Technology Solutions

Dec. 6, 2023
The CMMC represents a critical mandate from the U.S. DOD. Aerospace & Defense manufacturers that handle controlled unclassified information (CUI) must comply with CMMC requirements...

Executive Summary: Enterprise Resource Planning Manages Manufacturing Risk and Uncertainty in 2024

Jan. 4, 2024
Explore the future of manufacturing in 2024 by discovering how cloud-based ERP systems can help manufacturers thrive amidst supply chain disruptions and economic uncertainty.

Preventive Maintenance: Improve Productivity on Production Floors

June 28, 2023
Everything needs to run smoothly in manufacturing. For processes to run smoothly, they need continuous improvement in every part of the chain. One area is operator maintenance...

Voice your opinion!

To join the conversation, and become an exclusive member of IndustryWeek, create an account today!